Guia LPIC/Tópico 101: diferenças entre revisões
[edição não verificada] | [edição não verificada] |
Linha 49: | Linha 49: | ||
== Objetivo 1.101.4: Configuração de Dispositivos não IDE == |
== Objetivo 1.101.4: Configuração de Dispositivos não IDE == |
||
'''Peso: 1''' |
|||
{| style="background-color:#F0FFF0; border-style:solid; border-width:2px; border-color:#777777; padding-left:7px; padding-right:7px; margin-top:7px; margin-bottom:7px; width:100%" |
|||
| |
|||
'''Descrição:''' O canditato deverá estar apto a configurar dispositivos não-IDE como SCSI, SATA, drives USB usando a BIOS especial assim como as ferramentas Linux necessárias. |
|||
'''Áreas de conhecimento chave:''' |
|||
* 1.101.4 Setup non-IDE Devices |
|||
*Diferenciar entre os varios tipos de dispositivos não-IDE |
|||
Comment this objective! |
|||
*Manipular a BIOS para detectar IDs SCSI utilizados e disponíveis |
|||
Weight: 1 |
|||
*Ajustar o ID de hardware correto para diferentes dispositivos, especialmente o dispositivo de boot |
|||
*Configurar os ajustes da BIOS para controlar a seqüência de boot quando dispositivos não-IDE e IDE estão presentes |
|||
'''Esta é uma lista parcial dos arquivos utilizados, termos e utilitários:''' |
|||
Description: Candidates should be able to configure non-IDE devices as SCSI, SATA, USB drives using the special BIOS as well as the necessary Linux tools. |
|||
⚫ | |||
Key knowledge area(s): |
|||
⚫ | |||
Differentiate between the various types of non-IDE devices. |
|||
⚫ | |||
Manipulate BIOS to detect used and available SCSI IDs. |
|||
|} |
|||
Set the correct hardware ID for different devices, especially the boot device. |
|||
Configure BIOS settings to control the boot sequence when both non-IDE and IDE devices are present . |
|||
The following is a partial list of the used files, terms and utilities: |
|||
⚫ | |||
⚫ | |||
⚫ | |||
== Objetivo 1.101.5: Configuração de Placas de Expansão Diversas == |
== Objetivo 1.101.5: Configuração de Placas de Expansão Diversas == |
Revisão das 23h30min de 10 de agosto de 2006
|
Objetivo 1.101.1: Configuração de Atributos Fundamentais de BIOS
Peso: 1
Descrição: O candidato deve estar apto a configurar o hardware do sistema fazendo as escolhas corretas na BIOS do sistema em um hardware baseado em x86. Áreas de conhecimento chave:
Esta é uma lista parcial dos arquivos utilizados, termos e utilitários:
|
Objetivo 1.101.3: Configuração de Modens e Placas de som
Peso: 1
Descrição: O candidato deverá estar apto a configurar modem e atributos da placa de som. Áreas de conhecimento chave:
Esta é uma lista parcial dos arquivos utilizados, termos e utilitários:
|
Objetivo 1.101.4: Configuração de Dispositivos não IDE
Peso: 1
Descrição: O canditato deverá estar apto a configurar dispositivos não-IDE como SCSI, SATA, drives USB usando a BIOS especial assim como as ferramentas Linux necessárias. Áreas de conhecimento chave:
Esta é uma lista parcial dos arquivos utilizados, termos e utilitários:
|
Objetivo 1.101.5: Configuração de Placas de Expansão Diversas
Peso: 3
* 1.101.5 Setup different PC expansion cards Comment this objective! Weight: 3
Description: Candidates should be able to configure various cards for the various expansion slots. Key knowledge area(s): Know the differences between coldplug and hotplug devices. Determine hardware recources for devices.
The following is a partial list of the used files, terms and utilities: The appropriate subdirectories of /proc hotplug configuration files, terms and utilities lspci lsusb
Objetivo 1.101.6: Configuração de Dispositivos de Comunicação
Peso: 1
* 1.101.6 Configure Communication Devices Comment this objective! Weight: 1
Description: Candidates should be able to install and configure different internal and external communication devices like modems, ISDN adapters and DSL modems. Key knowledge area(s): Verification of compatibility requirements (such as the modem is not a winmodem). Correctly set IRQs, DMAs and I/O Ports of the cards to avoid conflicts between devices. Load and configure suitable device drivers. Set serial port speed. Setup modem for outbound PPP connections.
The following is a partial list of the used files, terms and utilities: /proc/dma /proc/interrupts /proc/ioports setserial
Objetivo 1.101.7: Configuração de Dispositivos USB
Peso: 1
* 1.101.7 Configure USB devices Comment this objective! Weight: 1
Description: Candidates should be able to activate USB support, use and configure different USB devices. Key knowledge area(s): Identify and load the correct USB driver module. Demonstrate knowledge of the USB layer architecture and the modules used in the different layers.
The following is a partial list of the used files, terms and utilities: lspci xHCI modules lsusb /etc/usbmgr/ usbmodules /etc/hotplug udev configuration files, utilities and documentation
|