Guia LPIC/Tópico 101: diferenças entre revisões

Origem: Wikilivros, livros abertos por um mundo aberto.
[edição não verificada][edição não verificada]
Sem resumo de edição
m Guia LPIC:Topico 101 movido para Guia LPIC: Tópico 101
(Sem diferenças)

Revisão das 00h35min de 3 de agosto de 2006

Voltar Guia LPIC - Página inicial Tópico 102

Objetivo 1.101.1: Configuração de Atributos Fundamentais de BIOS

Peso: 1

   *   1.101.1 Configure Fundamental BIOS Settings
     Comment this objective!
     Weight: 1
     Description: Candidates should be able to configure fundamental system hardware by making the correct settings in the system BIOS in x86 based hardware.
     Key knowledge area(s):
     Enable and disable integrated peripherals.
     Configure systems with or without external peripherals such as keyboards.
     Correctly set IRQ, DMA and I/O addresses for all BIOS administrated ports and settings for error handling.
     The following is a partial list of the used files, terms and utilities:
     /proc/ioports
     /proc/interrupts
     /proc/dma
     /proc/pci


Objetivo 1.101.3: Configuração de Modens e Placas de som

Peso: 1

   * 1.101.3 Configure Modem and Sound cards
     Comment this objective!
     Weight: 1
     Description: Candidates should be able to configure modem and soundcard settings.
     Key knowledge area(s):
     Ensure devices meet compatibility requirements (particularly that the modem is not an unsupported win-modem).
     Verify that correct resources are used by the cards.
     Configure modem for outbound dial-up.
     Set serial port speeds.
     The following is a partial list of the used files, terms and utilities:
     /proc/dma
     /proc/interrupts
     /proc/ioports
     /proc/pci
     lspci
     lsusb

Objetivo 1.101.4: Configuração de Dispositivos não IDE

Peso: 1

   * 1.101.4 Setup non-IDE Devices
     Comment this objective!
     Weight: 1
     Description: Candidates should be able to configure non-IDE devices as SCSI, SATA, USB drives using the special BIOS as well as the necessary Linux tools.
     Key knowledge area(s):
     Differentiate between the various types of non-IDE devices.
     Manipulate BIOS to detect used and available SCSI IDs.
     Set the correct hardware ID for different devices, especially the boot device.
     Configure BIOS settings to control the boot sequence when both non-IDE and IDE devices are present .
     The following is a partial list of the used files, terms and utilities:
     SCSI ID
     /proc/scsi/
     scsi_info

Objetivo 1.101.5: Configuração de Placas de Expansão Diversas

Peso: 3

   * 1.101.5 Setup different PC expansion cards
     Comment this objective!
     Weight: 3
     Description: Candidates should be able to configure various cards for the various expansion slots.
     Key knowledge area(s):
     Know the differences between coldplug and hotplug devices.
     Determine hardware recources for devices.
     The following is a partial list of the used files, terms and utilities:
     The appropriate subdirectories of /proc
     hotplug configuration files, terms and utilities
     lspci
     lsusb

Objetivo 1.101.6: Configuração de Dispositivos de Comunicação

Peso: 1

   * 1.101.6 Configure Communication Devices
     Comment this objective!
     Weight: 1
     Description: Candidates should be able to install and configure different internal and external communication devices like modems, ISDN adapters and DSL modems.
     Key knowledge area(s):
     Verification of compatibility requirements (such as the modem is not a winmodem).
     Correctly set IRQs, DMAs and I/O Ports of the cards to avoid conflicts between devices.
     Load and configure suitable device drivers.
     Set serial port speed.
     Setup modem for outbound PPP connections.
     The following is a partial list of the used files, terms and utilities:
     /proc/dma
     /proc/interrupts
     /proc/ioports
     setserial

Objetivo 1.101.7: Configuração de Dispositivos USB

Peso: 1

   * 1.101.7 Configure USB devices
     Comment this objective!
     Weight: 1
     Description: Candidates should be able to activate USB support, use and configure different USB devices.
     Key knowledge area(s):
     Identify and load the correct USB driver module.
     Demonstrate knowledge of the USB layer architecture and the modules used in the different layers.
     The following is a partial list of the used files, terms and utilities:
     lspci
     xHCI modules
     lsusb
     /etc/usbmgr/
     usbmodules
     /etc/hotplug
     udev configuration files, utilities and documentation

Categoria:LPI